1x6 Naniwa Chosera蝦牌磨刀石 - 所有係數 1x6 Naniwa Chosera Stones - All Grits(待審)

AvailabilityIn stock
SKU
1x6Naniwa
Special Price NT$17.00 Regular Price NT$22.00

Edge Pro上的Naniwa和Naniwa Chosera Stones,Hapstone Sharpener和TSProf就像添加噴射燃料一樣讓磨刀更迅速方便!

Naniwa and Naniwa Chosera Stones on the Edge Pro, Hapstone Sharpener and TSProf is like adding jet fuel!

Naniwa蝦牌磨刀石是優質的磨刀石,以其精彩的磨削效率而聞名。

蝦牌磨刀石的最大優勢之一是不同砂礫之間的硬度差異,可以有利地用於較硬或較軟的鋼。它們還具有非常高的砂礫密度,並且在使用前快速浸泡效果最佳。

The Naniwa Chosera stones are premium level stones and are well known for their wonderful feedback and fast action. One of the biggest advantages with the Chosera stones is the variety of hardness between the different grits, which can be used advantageously on harder or softer steels.They also have a very high grit density and work best with a quick soak before use.

這些磨刀石尺寸為1“x 6”(英吋),厚度為6毫米,安裝在鋁製底座上,完全適合任何Edge Pro,Hapstone和TSProf磨刀系統。

These stones measure 1" x 6", and are a beefy 6 mm thick and come mounted on an aluminum blank that fits perfectly in any Edge Pro, Hapstone and TSProf sharpening system.

 

蝦牌係數

Naniwa Chosera Grit

價格

Price

Naniwa 320 專業用

Naniwa 320 Pro

$1250NT

$40.00

 #400蝦牌

#400 Chosera

$1360NT

$44.00

Naniwa 600“泡泡糖”

Naniwa 600 "Bubble Gum" 

$960NT

$31.00

#600 蝦牌

#600 Chosera

$1360NT

$44.00

#800 蝦牌

#800 Chosera

$1360NT

$44.00

Naniwa 1K“巧克力棒”

Naniwa 1K "Chocolate Bar"

$680NT

$22.00

Naniwa 1K Goken Pro

Naniwa 1K Goken Pro

$1080NT

$35.00

#1,000 蝦牌

#1,000 Chosera

$1420NT

$46.00

#2,000 蝦牌

#2,000 Chosera

$1480NT

$48.00

#3,000 蝦牌

#3,000 Chosera

$1545NT

$50.00

Naniwa 4K Finisher

Naniwa 4K Finisher

$1390NT

$45.00

#5,000 蝦牌

#5,000 Chosera

$2005NT

$65.00

#10,000 蝦牌

#10,000 Chosera

$2315NT

$75.00

請從上面的下拉菜單中選擇您的係數。

Please choose your grit from the dropdown menu above.

粗砂(#400,#600,#800)具有攻擊性,適用於切削,修復和(重新)成型。 它們也非常適合去除金剛石板上更深的划痕。 #400 Chosera是一種非常結實,堅硬且具有侵略性的石頭,不易磨損。 #600 Chosera是一種柔軟的石頭,具有聳人聽聞的“奶油”反饋,並且在較硬的鋼材上表現優異。

Coarse Grit (#400, #600, #800) are aggressive, and geared toward stock removal, repairs, and (re)profiling. They are also excellent at removing the deeper scratches from diamond plates. The #400 Chosera is a very solid, hard and aggressive stone that does not wear easily. The #600 Chosera is a softer stone that has a sensational, "buttery"  feedback to it, and excels on harder steels.

中等砂礫(#800,#1,000,#2,000,#3,000)將大多數工具和刀具的邊緣細化到工作水平,并快速對鈍刀進行維護。 它們仍然具有足夠的侵略性,可以進行小修復和仿形工作,並且為精細的砂礫拋光石奠定了基礎。 #800 Chosera在技術上仍然是一塊粗糙的石頭,但是當與一些泥漿一起使用時,它會留下非常好的基本工作邊緣。 這是一個真正的主力。 #1,000 Chosera是該系列中最好的磨刀石之一,具有足夠的侵略性,可以進行大多數維護,同時留下比其他1K寶石更精緻的邊緣。 #2,000砂礫Chosera是一種較軟的石頭,在較軟的鋼刀(HRC~55及以下)上產生出色的“足夠好”的邊緣。 與#800 Chosera石頭結合使用時,#2,000石頭更有效。 #3,000石頭是一塊較硬的石頭,是優質刀具工作邊緣的理想選擇,也是拋光階段的優勢選擇。

Medium Grit (#800, #1,000, #2,000, #3,000) refine the edges on most tools and knives to working sharp levels, and quickly perform maintenance on dulled knives. They are still aggressive enough to do minor repair and profiling work, and they set the stage for the fine grit polishing stones. The #800 Chosera Is still technically a coarse stone, but when used with some mud, it leaves a very good, basic working edge. It is a real workhorse. The #1,000 Chosera is one of the best stones in the series, and is aggressive enough for most maintenance while leaving an edge that is slightly more refined than other 1K stones. The #2,000 grit Chosera is a softer stone, and produces an excellent "good enough" edge on softer steel knives (HRC~55 and below). The #2,000 stone is made even more effective when combined with the #800 Chosera stone. The #3,000 stone is a harder stone, and is the perfect choice for a working edge on a quality knife, and for setting the edge up for the polishing stages.

精細砂礫(#5,000,#10,000)將每一個優勢都帶到了一個全新的高度,並且切割變得毫不費力。 #5,000 Chosera是一塊柔軟的石頭,反饋非常好。 它產生鏡面效果,將邊緣提升到一個全新的水平。 #10,000 Chosera將鏡子更進一步,同時將邊緣細化到“剃須鋒利”的水平。 強烈建議在#10,000之前使用#5,000以獲得最佳效果。

Fine Grits (#5,000, #10,000) bring every edge to a whole new level, and where cutting becomes effortless. The #5,000 Chosera is a softer stone, with wonderful feedback. It produces a mirror finish that takes the edge to a whole new level. The #10,000 Chosera takes the mirror even further, while refining the edge to "shaving sharp" levels. It is highly recommended to use the #5,000 before the  #10,000 for the best results.

Naniwa 320 Pro石材是Naniwa獨特的配方,在質量和速度方面與蝦牌有關,具有更多的切割作用。 它是一種優質的過渡磨刀石,也是一種修復和重新鑲嵌的石頭。

The Naniwa 320 Pro stone is a unique formulation by Naniwa which is related to the Choseras in quality and speed, with a litte more cutting action. It s a premium grade transition stone as well as a repair and reprofiling stone.

Naniwa 600“泡泡糖”是一種中等水平的石材,具有令人驚訝的快速切割作用,可以去除早期的划痕並留下均勻的表面以進一步細化。

The Naniwa 600 "Bubble Gum" is a medium level stone that has surprisingly fast cutting action that removes earlier scratches and leaves an even surface for further refinement.

Naniwa 1K Goken Pro是一種中等水平的石頭,通常在日本以外是拿不到的。 它留下了良好的啞光效果,實際上可以獲得剃須效果。

The Naniwa 1K Goken Pro is a medium level stone that is normally not available outside Japan. It leaves a good matte finish, and can actually get hair shaving results.

Naniwa 1K“巧克力棒”是一種中等水平的傳統石頭,使用粘土裝訂,但具有更多的強度和穩定性,以及相當多的切割能力,並留下了可觀的1K邊緣。

The Naniwa 1K "Chocolate Bar" is a medium level traditional stone that uses clay binding, but has a little more stragnth and stability, and considerably more cutting power, and it leaves a respectable 1K edge.

Naniwa 4K Finisher是一種傳統風格的粘土石,但背後有Naniwa技術。 它的基質基礎相當堅固,並且釋放出足夠的泥漿,可以在沒有任何凹陷的情況下進行光滑,無光澤的表面處理。

The Naniwa 4K Finisher is a traditional style clay based stone, but with Naniwa technology behind it. It's matrix foundation is quite solid, and releases just enough mud to put on a smooth, matte finish without all the dishing. 

 

 

More Information
Width 1
Length 6
Write Your Own Review
You're reviewing:1x6 Naniwa Chosera蝦牌磨刀石 - 所有係數 1x6 Naniwa Chosera Stones - All Grits(待審)